Huawei Quidway S3900 Series - Display Poe-Profile

Command Manual – PoE & PoE Profile
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 2 PoE Profile Configuration Comma
nds
Huawei Technologies Proprietary
2-2
 Note:
PoE profile is a set of PoE configurations. One PoE profile can contain multiple PoE
features. When the poe apply command is used to apply a PoE profile to a port, some
PoE features can be applied successfully while some can not. PoE profiles are applied
to S3900 series Ethernet switches according to the following rules:
z When the apply poe-profile command is used to apply a PoE profile to a port, the
PoE profile is applied successfully only if one PoE feature in the PoE profile is
applied properly. When the display current-configuration command is used for
query, it is displayed that the PoE profile is applied properly to the port.
z If one or more features in the PoE profile are not applied properly on a port, the
switch will prompt explicitly which PoE features in the PoE profile are not applied
properly on which ports.
z The display current-configuration command can be used to query which PoE
profiles are applied to a port. However, the command cannot be used to query which
PoE features in a PoE profile are applied successfully.
Example
# Apply the existing PoE profile (profile-test) configuration to Ethernet1/0/1 through
Ethernet1/0/9 ports of the switch.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] apply poe-profile profile-test interface ethernet1/0/1 to
ethernet1/0/9
2.1.2 display poe-profile
Syntax
display poe-profile { all-profile | interface interface-type interface-number | name
profilename }
View
Any view
Parameter
all-profile：Display all PoE Profiles.
interface-type interface-number: Port type and port number
profilename: Name of a specified PoE profile.