Huawei Quidway S3900 Series Command Manual

Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 2 RIP Configuration Commands
Huawei Technologies Proprietary
2-12
Every routing protocol has its own preference. Its default value is determined by the
specific routing policy. The preferences of routing protocols will finally determine which
routing algorithm's routes will be selected as the optimal routes in the IP routing table.
You can use this command to modify the RIP preference manually.
Example
# Specify the RIP preference as 20.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] rip
[Quidway-rip] preference 20
2.1.13 reset
Syntax
reset
View
RIP view
Parameter
None
Description
Use the reset command to reset the system configuration parameters of RIP.
When you need to re-configure the parameters of RIP, you can use this command to
restore the default setting.
Example
# Reset the RIP system configuration.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] rip
[Quidway-rip] reset
% Reset RIP's configuration and restart RIP? [Y/N]y
2.1.14 rip
Syntax
rip
undo rip

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English