Command Manual – File System Management
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 File System Management Configuration
Commands
Huawei Technologies Proprietary
1-5
Caution:
z Before configuring the main or backup attribute for a Web file in the fabric, make
sure the file exists on all devices in the fabric.
z The configuration of the main or backup attribute of a Web file takes effect
immediately without restarting the device.
z After you upgrade a Web file, you need to specify the new Web file in the Boot menu
after restarting the switch. Otherwise, the Web server cannot function normally.
Example
# Configure the Web file named boot.web to be of the main attribute.
<Quidway> boot web-package boot.web main
1.1.5 display boot-loader
Syntax
display boot-loader [ unit unit-id ]
View
Any view
Parameter
unit unit-id: Specifies the unit ID of a switch.
Description
Use the display boot-loader command to display the information about the app
startup files of the fabric or of a device in the fabric. Displayed information includes the
current app startup file name, and the main and backup app startup files to be used
when the switch starts the next time.
If you execute the display boot-loader command without unit unit-id, all app startup
files of the fabric will be displayed.
Example
# Display the information about the app startup files of unit 1.
<Quidway> display boot-loader unit 1
Unit 1
The current boot app is: s3900.bin
The main boot app is: s3900.bin
The backup boot app is: s3900bak.bin
To Next Page
Loading...
Need help?
General