Huawei Quidway S3900 Series Command Manual

Command Manual – ARP
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 ARP Configuration Commands
Huawei Technologies Proprietary
1-3
undo arp timer aging
View
System view
Parameter
aging-time: Aging time (in minutes) of the dynamic ARP mapping entries. This
argument ranges from 1 to 1,440.
Description
Use the arp timer aging command to configure the aging time for dynamic ARP
mapping entries.
Use the undo arp timer aging command to restore the default aging time.
By default, the aging time for dynamic ARP mapping entries is 20 minutes.
Related command: display arp timer aging.
Example
# Configure the aging time to be 10 minutes for dynamic ARP mapping entries.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] arp timer aging 10
1.1.4 display arp
Syntax
display arp [ dynamic | static | ip-address ]
View
Any view
Parameter
dynamic: Displays dynamic ARP mapping entries.
static: Displays static ARP mapping entries.
ip-address: IP address. ARP mapping entries containing the IP address are to be
displayed.
Description
Use the display arp command to display specific ARP mapping entries.
If you execute this command with no keyword/argument specified, all the ARP mapping
entries are displayed.

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English