Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-23
len: 36
seq#: 80000001
chksum: 0xfcaf
Options: (DC)
Net mask:255.255.0.0
Tos 0 metric: 1
E type : 2
Forwarding Address: 0.0.0.0
Tag: 1
Table 3-8 Description on the fields of the display ospf lsdb ase command
Field Description
type Type of the LSA
ls id Link state ID of the LSA
adv rtr
Router ID of the router that advertises
the LSA
ls age Age of the LSA
len Length of the LSA
seq# Sequence number of the LSA
chksum Checksum of the LSA
Options Options of the LSA
Net mask Network mask
E type Type of external route
Forwarding Address Forwarding address
Tag Tag
3.1.20 display ospf nexthop
Syntax
display ospf [ process-id ] nexthop
View
Any view
Parameter
process-id: OSPF Process ID. If you do not specify a process ID, this command applies
to all current OSPF processes.
To Next Page
Loading...
Need help?
General