Huawei Quidway S3900 Series - Ip Address Dhcp-Alloc; BOOTP Client Configuration Commands; Display Bootp Client

Command Manual - Management VLAN
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 2 DHCP/BOOTP Client
Configuration
Huawei Technologies Proprietary
2-4
2.1.4 ip address dhcp-alloc
Syntax
ip address dhcp-alloc
undo ip address dhcp-alloc
View
VLAN interface view
Parameter
None
Description
Use the ip address dhcp-alloc command to configure a VLAN interface to obtain an IP
address through DHCP.
Use the undo ip address dhcp-alloc command to cancel the configuration.
By default, a VLAN interface does not use DHCP to obtain an IP address.
Example
# Configure the management VLAN interface to obtain an IP address through DHCP.
(Assume that VLAN 1 is the management VLAN.)
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface Vlan-interface 1
[Quidway-Vlan-interface1] ip address dhcp-alloc
2.2 BOOTP Client Configuration Commands
2.2.1 display bootp client
Syntax
display bootp client [ interface Vlan-interface vlan-id ]
View
Any view
Parameter
vlan-id: ID of the management VLAN interface.