Huawei Quidway S3900 Series Command Manual

Command Manual – Configuration File Management
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 Configuration File Management
Commands
Huawei Technologies Proprietary
1-7
1.1.2 display saved-configuration
Syntax
display saved-configuration [ unit unit-id ] [ by-linenum ]
View
Any view
Parameter
unit unit-id: Specifies the unit ID of a switch.
by-linenum: Displays line numbers.
Description
Use the display saved-configuration command to display the content of the primary
configuration file in the Flash of a switch.
Related command: save, reset saved-configuration, display
current-configuration.
Example
# Display the content of the primary configuration file in the Flash.
<Quidway>display saved-configuration
#
sysname Quidway
#
gvrp
#
MAC-authentication
#
interface Aux1/0/0
#
interface Ethernet1/0/1
priority 7
webcache address 1.1.1.1 mac 0000-0000-0001 vlan 1
traffic-limit inbound ip-group 3001 rule 1 640 exceed remark-dscp 4
traffic-priority inbound ip-group 2000 rule 0 dscp ef
line-rate inbound 128
#
interface Ethernet1/0/2
voice vlan enable
#
interface Ethernet1/0/3

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English