Huawei Quidway S3900 Series Command Manual

Command Manual – Voice VLAN
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 Voice VLAN Configuration Commands
Huawei Technologies Proprietary
1-3
Voice Vlan aging time: 100 minutes
Current voice vlan enabled port mode:
PORT MODE
--------------------------------
Ethernet1/0/2 AUTO
Ethernet1/0/3 MANUAL
Table 1-1 Description on the fields of the display voice vlan status command
Field Description
Voice Vlan status
The status of global voice VLAN function:
enabled/disabled
Voice Vlan ID
The VLAN which is currently enabled with voice
VLAN function.
Voice Vlan security mode
The status of voice VLAN security mode:
enabled/disabled.
Voice Vlan aging time The voice VLAN aging time
Current voice vlan enable port
mode
The ports with the voice VLAN function enabled
Caution:
The “Current voice vlan enable port mode” field lists the ports with the voice VLAN
function enabled. Note that a port listed in this field may not currently operate in a voice
VLAN. To check the ports operating in the current voice VLAN, use the display vlan
command, which is described in section
0“
display vlan”.
1.1.4 display vlan
Syntax
display vlan vlan-id
View
Any view
Parameter
vlan-id: Voice VLAN ID in the range of 1 to 4094. VLAN 1 can not be enabled with voice
VLAN function.

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English