Command Manual – IP Address and Confiugration
Quidway S3900 Series Ethernet Switches-Release
1510 Chapter 2 IP Performance Configuration Commands
2-7
Route Entry Count : 30
2.1.7 display icmp statistics
Syntax
display icmp statistics
View
Any view
Parameter
None
Description
Use the display icmp statistics command to view the statistics about ICMP packets.
Related command: display ip interface and reset ip statistics.
Example
# View the statistics about ICMP packets.
<Quidway> display icmp statistics
Input: bad formats 0 bad checksum 0
echo 5 destination unreachable 0
source quench 0 redirects 0
echo reply 10 parameter problem 0
timestamp 0 information request 0
mask requests 0 mask replies 0
time exceeded 0
Output:echo 10 destination unreachable 0
source quench 0 redirects 0
echo reply 5 parameter problem 0
timestamp 0 information reply 0
mask requests 0 mask replies 0
time exceeded 0
Table 2-2 Description on the fields of the display icmp statistics command
Field Description
bad formats Number of input packets in bad formats
bad checksum Number of input packets with bad checksum
echo Number of input/output echo request packets
To Next Page
Loading...
Need help?
General