Huawei Quidway S3900 Series - Reset Vrrp Statistics; Vrrp Authentication-Mode

Command Manual – VRRP
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 VRRP Configuration Commands
Huawei Technologies Proprietary
1-3
Field Description
Advertise Rcvd Number of the received advertisement packets
Priority Zero Pkts Sent
Number of the sent advertisement packets with
the priority of 0
Invalid Type Pkts Rcvd Number of packet type errors
1.1.2 reset vrrp statistics
Syntax
reset vrrp statistics [ vlan-interface vlan-id ] [ virtual-router-id ]
View
User view
Parameter
vlan-id: VLAN interface ID.
virtual-router-id: VRRP virtual router ID ranging from 1 to 255.
Description
Use the reset vrrp command to clear the statistics information about VRRP.
When you execute this command,
z If the interface index and backup group ID are not specified, the statistics
information about all the backup groups on the switch is cleared.
z If only the interface index is specified, the statistics information about all the
backup groups on the interface will be cleared.
z If both the interface index and backup group ID are specified, the statistics
information about the specified backup group on the interface is cleared.
Example
# Clear the VRRP statistics on the switch.
<Quidway> reset vrrp statistics
1.1.3 vrrp authentication-mode
Syntax
vrrp authentication-mode authentication-type authentication-key
undo vrrp authentication-mode