Huawei Quidway S3900 Series Command Manual

Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 2 RIP Configuration Commands
Huawei Technologies Proprietary
2-5
View
Any view
Parameter
None
Description
Use the display rip routing command to display RIP routing information.
Example
# Display RIP routing table information.
<Quidway> display rip routing
RIP routing table: public net
A = Active I = Inactive G = Garbage collection
C = Change T = Trigger RIP
Destination/Mask Cost NextHop Age SourceGateway Att
192.168.110.0/24 1 31.31.31.8 7s 31.31.31.8 A
200.1.1.0/24 1 31.31.31.8 7s 31.31.31.8 A
130.1.0.0/16 1 31.31.31.8 7s 31.31.31.8 A
Table 2-3 Description on the fields of the display rip routing command
Field Description
Destination/Mask Destination address/Mask
Cost Cost
NextHop Net hop address
Age
Amount of time that elapsed after the route is
advertised
SourceGateway Gateway originating the route
Output
Indicates whether to allow the interface to send
RIP packets ("on" means yes; "off" means no).
Split-horizon
Indicates whether split horizon is enabled ("on"
means yes; "off" means no)
2.1.6 filter-policy export
Syntax
filter-policy { acl-number | ip-prefix ip-prefix-name } export [ routing-protocol ]

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English