Huawei Quidway S3900 Series - Display Ssh Server

Command Manual –SSH Terminal Service
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 SSH Terminal Service
Configuration Commands
Huawei Technologies Proprietary
1-4
1.1.3 display ssh server
Syntax
display ssh server { status | session }
View
Any view
Parameter
status: Displays SSH status information.
session: Displays SSH session information.
Description
Use the display ssh server command to display the status or session information
about the SSH server.
Related command: ssh server authentication-retries, ssh server timeout.
Example
# Display the status information about the SSH server.
<Quidway> display ssh server status
SSH version : 1.99
SSH connection timeout : 60 seconds
SSH server key generating interval : 0 hours
SSH Authentication retries : 3 times
SFTP Server: Enable
Caution:
z If you use the ssh server compatible-ssh1x enable command to configure the server
to be compatible with the client of SSHv1.x version, the SSH version will be
displayed as 1.99.
z If you use the undo ssh server compatible-ssh1x enable command to configure the
server to be not compatible with the client of SSHv1.x version, the SSH version will
be displayed as 2.0.
# Display the session information about the SSH server.
<Quidway> display ssh server session
Conn Ver Encry State Retry SerType Username
VTY 0 2.0 AES started 0 stelnet kk