Huawei Quidway S3900 Series Command Manual

Command Manual – MAC Address Table
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 MAC Address Table Configuration
Commands
Huawei Technologies Proprietary
1-1
Chapter 1 MAC Address Table Configuration
Commands
 Note:
This chapter describes the management of static, dynamic, and blackhole MAC
address entries. For information about the management of multicast MAC address
entries, refer to the section related to multicast protocol in Quidway S3900 Series
Ethernet Switches Command Manual.
1.1 MAC Address Table Configuration Commands
1.1.1 display mac-address aging-time
Syntax
display mac-address aging-time
View
Any view
Parameter
None
Description
Use the display mac-address aging-time command to display the aging time of the
dynamic MAC address entries in the MAC address table.
Related command: mac-address, mac-address timer, display mac-address.
Example
# Display the aging time of the dynamic MAC address entries.
<Quidway>display mac-address aging-time
Mac address aging time: 300s
The output information indicates that the aging time of the dynamic MAC address
entries is 300 seconds.
<Quidway> display mac-address aging-time

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English