Huawei Quidway S3900 Series - Display Ospf Retrans-Queue

Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-28
View
Any view
Parameter
process-id: OSPF Process ID. If you do not specify a process ID, this command applies
to all current OSPF processes.
Description
Use the display ospf request-queue command to display the information about the
OSPF request-queue.
Example
# Display the information about the OSPF request-queue.
<Quidway> display ospf request-queue
The Router's Neighbors is
RouterID: 1.1.1.1 Address: 1.1.1.1
Interface: 1.1.1.3 Area: 0.0.0.0
LSID:1.1.1.3 AdvRouter:1.1.1.3 Sequence:80000017 Age:35
Table 3-13 Description on the fields of the display ospf request-queue command
Field Description
RouterID Router ID of neighbor router
Address
Address of the interface, through which
neighbor routers communicate with the
router
Interface
Address of the interface on the network
segment
Area Area number of OSPF
LSID:1.1.1.3 Link State ID of the LSA
AdvRouter
Router ID of the router that advertised
the LSA
Sequence
Sequence number of the LSA, used to
discover old and repeated LSAs
Age Age of the LSA
3.1.23 display ospf retrans-queue
Syntax
display ospf [ process-id ] retrans-queue