Huawei Quidway S3900 Series Command Manual

Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-4
[Quidway] ospf 1
[Quidway-ospf-1] asbr-summary 10.2.0.0 255.255.0.0 not-advertise
3.1.4 authentication-mode
Syntax
authentication-mode { simple | md5 }
undo authentication-mode
View
OSPF Area view
Parameter
simple: Uses simple text authentication mode.
md5: Uses MD5 cipher text authentication mode.
Description
Use the authentication-mode command to configure one area of OSPF to support the
authentication attribute.
Use the undo authentication-mode command to cancel the authentication attribute of
this area.
By default, an area does not support authentication attribute.
All the routers in one area must use the same authentication mode (no authentication,
simple text authentication, or MD5 cipher text authentication). If the mode of supporting
authentication is configured, all routers on the same segment must use the same
authentication key.
Use the ospf authentication-mode simple command to configure a simple text
authentication key.
Use the ospf authentication-mode md5 command to configure the MD5 cipher text
authentication key if the area is configured to support MD5 cipher text authentication
mode.
Related command: ospf authentication-mode.
Example
# Enter area 0 view.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] ospf 1
[Quidway-ospf-1] area 0
# Specify the OSPF area 0 to support MD5 cipher text authentication.

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English