Huawei Quidway S3900 Series Command Manual

Command Manual – Mirroring
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 Mirroring Commands
Huawei Technologies Proprietary
1-2
Information displayed on the source mirroring group for remote mirroring includes:
z Group number
z Group type: remote-source
z Group status
z Information of the source port
z Information of the reflector port
z Remote-probe VLAN information
Example
# Display the parameter settings of the port mirroring group.
<Quidway> display mirroring-group all
mirroring-group 2:
type: local
status: active
mirroring port:
GigabitEthernet1/1/1 both
monitor port: GigabitEthernet1/1/4
1.1.2 display qos-interface mirrored-to
Syntax
display qos-interface { interface-type interface-number | unit-id } mirrored-to
View
Any view
Parameter
interface-type interface-number: port of the switch. If you enter this argument, the
switch will display the parameter settings of the specified port.
unit-id: Unit ID. If you enter this argument, the switch will display the parameter settings
on Unit.
Description
Use the display qos-interface mirrored-to command to display the parameter
settings of traffic mirroring.
Information displayed includes:
z Port name and action name of traffic mirroring
z Direction of traffic mirroring
z ACL for identifying traffics
z Destination port
Related command: mirrored-to

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English