Huawei Quidway S3900 Series Command Manual

Command Manual – FTP and TFTP
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 FTP and TFTP
Huawei Technologies Proprietary
1-36
Use the undo tftp source-interface command to cancel the source interface setting.
After you execute this command, the TFTP client system decides which interface will
be used for accessing TFTP servers.
Example
# Specify Vlan-interface1 as the source interface, so that the TFTP client always uses it
to connect with a TFTP server.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] tftp source-interface Vlan-interface 1
1.3.8 tftp source-ip
Syntax
tftp source-ip ip-address
undo tftp source-ip
View
System view
Parameter
ip-address: IP address that is to be specified as the source IP address.
Description
Use the tftp source-ip command to specify the source IP address of a TFTP client, so
that the TFTP client always uses it to connect with a TFTP server. The value of
argument ip-address must be an IP address on the device where the configuration is
performed, and otherwise a prompt appears to show the configuration fails.
Use the undo tftp source-ip command to cancel the source IP address setting. After
you execute this command, the TFTP client system decides which IP address on it will
be used for accessing TFTP servers.
Example
# Specify 192.168.0.1 as the source IP address, so that the TFTP client always uses it
to connect with a TFTP server
Specify the source IP address for the FTP client.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] tftp source-ip 192.168.0.1

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English