Command Manual – Configuration File Management
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 Configuration File Management
Commands
Huawei Technologies Proprietary
1-1
Chapter 1 Configuration File Management
Commands
Note:
File path and file name can be represented in one of the following ways:
z In universal resource locator (URL) format and starting with “unit [No.]>flash:/” ( [No.]
represents the unit ID of the switch). This method is used to specify a file on a
specified unit. For example, if the unit ID of the switch is 1, the URL of the file named
text.txt in the root directory of the switch is unit1>flash:/text.txt;
z URL starting with “flash:/”. This method can be used to specify the files saved in the
flash of the current unit;
z Inputting the path name or file name directly. This method can be used to specify the
path to go to or a file in the current work directory.
1.1 File Attribute Configuration Commands
1.1.1 display current-configuration
Syntax
display current-configuration [ configuration [ configuration-type ] | interface
[ interface-type ] [ interface-number ] | vlan [ vlan-id ] ] [ by-linenum [ | { begin | include
| exclude } regular-expression ]
View
Any view
Parameter
configuration: Displays the specified configuration.
configuration-type: Configuration type, which can be one of the following: acl-adv,
acl-basic, acl-ethernetframe, acl-user, hwping, isp, radius-template, system, and
user-interface.
interface: Displays port configuration.
interface-type: Port/interface type, which can be one of the following: Aux, Ethernet,
GigabitEthernet, Loopback, NULL and VLAN.
To Next Page
Loading...
Need help?
General