Huawei Quidway S3900 Series Command Manual

Command Manual – SNMP and RMON
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 SNMP Configuration Commands
Huawei Technologies Proprietary
1-12
notifyview: Notification view name, ranging from 1 to 32 bytes.
acl-number: The basic access list number, ranging from 2,000 to 2,999.
Description
Use the snmp-agent group command to configure a new SNMP group, that is, to map
SNMP user to SNMP view.
Use the undo snmp-agent group command to cancel a specified SNMP group.
By default, the SNMP group configured with the snmp-agent group v3 command is
not authenticated and encrypted.
Related command: snmp-agent mib-view, snmp-agent usm-user.
Example
# Create SNMPv3 group 1.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] snmp-agent group v3 group1
1.1.13 snmp-agent local-engineid
Syntax
snmp-agent local-engineid engineid
undo snmp-agent local-engineid
View
System view
Parameter
engineid: Specifies the engine ID with a character string, only composed of 10 to 64
hexadecimal numbers. Two hexadecimal characters form an octet.
Description
Use the snmp-agent local-engineid command to set the engine ID of the local SNMP
entity.
Use the undo snmp-agent local-engineid command to restore the default setting.
By default, the device engine ID is "Enterprise Number + device information". Device
information is determined according to different products. It can be IP address, MAC
address or user-defined hexadecimal numeral string.
Related command: snmp-agent usm-user.

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English