Huawei Quidway S3900 Series Command Manual

Command Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
Huawei Technologies Proprietary
1-24
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] domain system
[Quidway-isp-system] self-service-url enable
http://10.153.89.94/selfservice/modPasswd1x.jsp|userName
1.1.22 service-type
Syntax
service-type { ftp | lan-access | { telnet | ssh | terminal }* [ level level ] }
undo service-type { ftp | lan-access | { telnet | ssh | terminal }* }
View
Local user view
Parameter
ftp: Specifies that this is a ftp user.
lan-access: Specifies that this is a LAN access user (who is generally an Ethernet
access user, for example, 802.1x user).
telnet: Authorizes the user to access the Telnet service.
ssh: Authorizes the user to access the SSH service.
terminal: Authorizes the user to access the terminal service (that is, allows the user to
log into the switch through the Console port).
level level: Specifies the level of the Telnet, terminal or SSH user. Where, level is an
integer ranging from 0 to 3 and defaulting to 0.
Description
Use the service-type command to authorize the user to access the specified type(s)
of service(s).
Use the undo service-type command to inhibit the user from accessing the specified
type(s) of service(s).
By default, the user is inhibited from accessing any type of service.
Example
# Authorize user1 to access the Telnet service.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] local-user user1
New local user added.
[Quidway-luser-user1] service-type telnet

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English