Huawei Quidway S3900 Series Command Manual

Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-15
Field Description
Interface Name of interface belonging to this area
Cost Cost of routes
State State information
Type Network type of OSPF interface
Priority Priority
Designated Router IP address of designated router (DR)
Backup Designated
Router
IP address of backup designated router (BDR)
OSPF timers, defined as follows:
Hello Interval of hello packet
Dead Interval of dead neighbors
Poll Interval of poll
Timers
Retransmit Interval of retransmitting LSA
Transmit Delay Delay time of transmitting LSA
3.1.16 display ospf cumulative
Syntax
display ospf [ process-id ] cumulative
View
Any view
Parameter
process-id: OSPF Process ID. If you do not specify a process ID, this command applies
to all current OSPF processes .
Description
Use the display ospf cumulative command to display cumulative OSPF statistics.
Example
# Display cumulative OSPF statistics.
<Quidway> display ospf cumulative
OSPF Process 1 with Router ID 1.1.1.1
Cumulations
IO Statistics

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English