Huawei Quidway S3900 Series Command Manual

Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-14
Example
# Display brief OSPF information.
<Quidway> display ospf brief
OSPF Process 1 with Router ID 10.110.95.189
OSPF Protocol Information
RouterID: 10.110.95.189 Border Router: Area AS
spf-schedule-interval: 5
Routing preference: Inter/Intra: 10 External: 150
Default ASE parameters: Metric: 1 Tag: 1 Type: 2
SPF computation count: 16
Area Count: 1 Nssa Area Count: 0
Area 0.0.0.0:
Authtype: none Flags: <>
SPF scheduled: <>
Interface: 201.1.1.4 (Vlan-interface1)
Cost: 1 State: DR Type: Broadcast
Priority: 1
Designated Router: 201.1.1.4
Backup Designated Router: 201.1.1.3
Timers: Hello 10, Dead 40, Poll 40, Retransmit 5, Transmit Delay 1
Table 3-3 Description on the fields of the display ospf brief command
Field Description
RouterID Router ID of the router
Border Router
Border routers for connection to the area, including
ASBRs and ABRs
spf-schedule-interval Interval of SPF schedule
Authtype Authentication type of OSPF
Routing preference
Routing preference of OSPF. The internal route of OSPF
includes intra/inter area route, and its default routing
preference is 10, while that of the external route of OSPF
is 150 by default
Default ASE
parameters
Default ASE parameters of OSPF, including metric, type
and tag
SPF computation
count
SPF computation count since OSPF is enabled
Area Count Areas for connection to this router
Nssa Area Count Number of NSSA areas
SPF scheduled SPF scheduled (flag)

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English