Huawei Quidway S3900 Series Command Manual

Command Manual – Login
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 Login Commands
Huawei Technologies Proprietary
1-27
1.1.30 user privilege level
Syntax
user privilege level level
undo user privilege level
View
User interface view
Parameter
level: Command level ranging from 0 to 3.
Description
Use the user privilege level command to configure the command level available to the
users logging into the user interface.
Use the undo user privilege level command to revert to the default command level.
By default, the commands of level 3 are available to the users logging into the AUX user
interface. The commands of level 0 are available to the users logging into VTY user
interfaces.
Example
# Configure that commands of level 0 are available to the users logging into VTY 0.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] user-interface vty 0
[Quidway-ui-vty0] user privilege level 0
# You can verify the above configuration by Telneting to VTY 0 and displaying the
available commands, as listed in the following.
<Quidway> ?
User view commands:
cluster Run cluster command
language-mode Specify the language environment
nslookup Query Internet name servers
ping Ping function
quit Exit from current command view
super Set the current user priority level
telnet Establish one Telnet connection
tracert Trace route function
undo Cancel current setting

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English