Huawei Quidway S3900 Series Command Manual

Command Manual – System Maintenance and Debugging
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 Basic System Configuration & De
bugging Commands
Huawei Technologies Proprietary
1-8
<Quidway> display debugging unit 1
IP icmp debugging is on
Rip packet debugging switch is on
Rip receive debugging switch is on
Rip send debugging switch is on
1.2.3 display users
Syntax
display users [ all ]
View
Any view
Parameter
all: Displays the information about all user terminal interfaces.
Description
Use the display users command to display the status and configuration information
about user terminal interfaces.
Example
# Display the status and configuration information about user terminal interfaces.
<Quidway> display users
UI Delay Type Ipaddress Username Userlevel
0 AUX 0 00:00:17 3
8 VTY 0 01:37:55 TEL 192.168.0.200 3
+ 9 VTY 1 00:00:00 TEL 192.168.0.3 3
12 VTY 4 00:00:00 TEL 192.168.0.115 3
+ : Current operation user.
F : Current operation user work in async mode.
Table 1-2 Description on the output user terminal interface information
Item Description
UI User interface
Delay
Delay time when no interaction occurs
between user and device
Type User login type
Ipaddress
IP address used when login using telnet
program

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English