Huawei Quidway S3900 Series - Display Hwtacacs

Command Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
Huawei Technologies Proprietary
1-62
Description
Use the data-flow-format command to configure the unit of data flows sent to the
TACACS server.
Use the undo data-flow-format command to restore the default.
By default, the data unit is byte and the data packet unit is one-packet.
Related command: display hwtacacs.
Example
# Set the unit of data flow destined for the HWTACACS server to kilo-byte and the
data packet unit to kilo-packet.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] hwtacacs scheme hwt1
[Quidway- hwtacacs-hwt1] data-flow-format data kilo-byte
[Quidway- hwtacacs-hwt1] data-flow-format packet kilo-packet
1.3.2 display hwtacacs
Syntax
display hwtacacs [ hwtacacs-scheme-name [ statistics ] ]
View
Any view
Parameter
hwtacacs-scheme-name: HWTACACS scheme name, a string of 1 to 32
case-insensitive characters. If no HWTACACS scheme is specified, the system
displays the configuration of all HWTACACS schemes.
statistics: Displays complete statistics about the HWTACACS server.
Description
Use the display hwtacacs command to view configuration or statistics information of
specified or all HWTACACS schemes.
Related command: hwtacacs scheme.
Example
# View configuration information of HWTACACS scheme gy.
<Quidway> display hwtacacs gy
--------------------------------------------------------------------
HWTACACS-server template name : gy