Huawei Quidway S3900 Series Command Manual

Command Manual – Centralized MAC Address Authentication
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 Centralized MAC Address
Authentication Configuration Commands
Huawei Technologies Proprietary
1-5
Description
Use the mac-authentication interface command to enable the centralized MAC
address authentication for specified ports.
Use the undo mac-authentication interface command to disable the centralized
MAC address authentication on specified ports.
By default, centralized MAC address authentication is disabled on a port.
 Note:
z To make the centralized MAC address authentication configuration takes effect on a
port, you need to enable the centralized MAC address authentication for the port
after you enable centralized MAC address authentication globally.
z The configuration of the maximum number of learned MAC addresses (configured
through the mac-address max-mac-count command) is unavailable for the ports
with centralized MAC address authentication enabled. Similarly, the centralized
MAC address authentication is unavailable for the ports with the maximum number
of learned MAC addresses configured.
Example
# Enable centralized MAC address authentication for Ethernet 1/0/1 port.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] mac-authentication interface Ethernet 1/0/1
1.1.4 mac-authentication authmode usernameasmacaddress
Syntax
mac-authentication authmode usernameasmacaddress [ usernameformat
{ with-hyphen | without-hyphen } ]
undo mac-authentication authmode
View
System view
Parameter
usernameformat: Specifies the input format of the username and password.
with-hyphen: Uses hyphened MAC addresses as usernames and passwords,
00-05-e0-1c-02-e3 for example.

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English