Huawei Quidway S3900 Series Command Manual

Command Manual – Multicast Protocol
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 7 MSDP Configuration Commands
Huawei Technologies Proprietary
7-6
7.1.6 import-source
Syntax
import-source [ acl acl-number ]
undo import-source
View
MSDP view
Parameter
acl-number: Basic or advanced IP ACL number, ranging from 2000 to 3999. An ACL
controls SA message advertisement by filtering sources (basic ACL) and filtering
sources or groups (advanced ACL). If you do not specify this argument, no multicast
source is advertised.
Description
Use the import-source command to specify the (S, G) entries in this domain that need
to be advertised when an MSDP peer creates an SA message.
Use the undo import-source command to cancel the configuration.
By default, an SA message advertise all the (S, G) entries in the domain.
In addition, you can also use the peer sa-policy import command or the peer
sa-policy export command to filter forwarded SA messages.
Example
# Specify the (S, G) entries in the multicast routing table to be advertised when an
MSDP peer creates an SA message.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] acl number 3101
[Quidway-acl-adv-3101] rule permit ip source 10.10.0.0 0.0.255.255
destination 225.1.0.0 0.0.255.255
[Quidway-acl-adv-3101] quit
[Quidway] msdp
[Quidway-msdp] import-source acl 3101
7.1.7 msdp
Syntax
msdp
undo msdp

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English