Command Manual - File System Management
Quidway S5100-EI Series Ethernet Switches-Release 1510
Chapter 2 FTP/TFTP Lighting Configuration
Commands
Huawei Technologies Proprietary
2-4
Use the undo password command to cancel the password setting.
Note that, after the local-user password-display-mode cipher-force command is
used, the user password will be displayed in cipher text even though the password
command is used to specify the password display mode to simple.
Example
# Set the password of user hello1 to 20030422 in plain text.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] local-user hello1
[Quidway-luser-hello1] password simple 20030422
2.1.5 ftp
Syntax
ftp [ ipaddress [ port ] ]
View
User view
Parameter
ipaddress: IP address of a remote FTP server.
port: Port number of the remote FTP server. If the port argument is not specified, the
default port number will be used.
Description
Use the ftp command to establish a control connection with a remote FTP server and
enter FTP client view.
Example
# Connect to the remote FTP server with IP address 1.1.1.1.
<Quidway> ftp 1.1.1.1
Trying ...
Press CTRL+K to abort
Connected.
220 FTP service ready.
User(none):hello
331 Password required for hello.
Password:
230 User logged in.
To Next Page
Loading...
Need help?
General