Huawei Quidway S3900 Series - Region-Name; Reset Stp

Command Manual – MSTP
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 MSTP Configuration Commands
Huawei Technologies Proprietary
1-8
1.1.7 region-name
Syntax
region-name name
undo region-name
View
MST region view
Parameter
name: MST region name to be set for the switch, a string of 1 to 32 characters.
Description
Use the region-name command to set an MST region name for a switch.
Use the undo region-name command to revert to the default MST region name.
The default MST region name of a switch is its MAC address.
MST region name, along with VLAN mapping table and MSTP revision level,
determines the MST region which a switch belongs to.
Related command: instance, revision-level, check region-configuration,
vlan-mapping modulo, and active region-configuration.
Example
# Set the MST region name of the switch to “hello”.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] stp region-configuration
[Quidway-mst-region] region-name hello
1.1.8 reset stp
Syntax
reset stp [ interface interface-list ]
View
User view
Parameter
interface-list: Ethernet port list. You can specify multiple Ethernet ports by providing this
argument in the form of interface-list = { interface-type interface-number [ to