Huawei Quidway S3900 Series Command Manual

Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-24
Description
Use the display ospf nexthop command to display the OSPF next-hop information.
Example
# Display the OSPF next-hop information.
<Quidway> display ospf nexthop
OSPF Process 1 with Router ID 1.1.1.1
Next hops:
Address Type Refcount Intf Addr Intf Name
---------------------------------------------------------------
202.38.160.1 Direct 3 202.38.160.1 Vlan-interface2
202.38.160.2 Neighbor 1 202.38.160.1 Vlan-interface2
Table 3-9 Description on the fields of the display ospf nexthop command
Field Description
Address Address of next hop
Type Type of next hop
Refcount
Reference count of the next hop,
namely, number of routes using the next
hop
Intf Addr
IP address of the interface to the next
hop
Intf Name Interface to the next hop
nexthop Next hop
3.1.21 display ospf peer
Syntax
display ospf [ process-id ] peer [ brief | statistics ]
View
Any view
Parameter
process-id: OSPF Process ID. If you do not specify a process ID, this command applies
to all current OSPF processes.
Description
Use the display ospf peer command to display the information about OSPF peer.

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English