EasyManuals Logo

Huawei Quidway S3900 Series Command Manual

Huawei Quidway S3900 Series
1159 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #529 background imageLoading...
Page #529 background image
Command Manual – 802.1x
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 802.1x Configuration Commands
Huawei Technologies Proprietary
1-20
equal to that of the interface-name before the to keyword. &<1-10> means that up to 10
port indexes/port index lists can be provided.
Description
Use the dot1x version-check command to enable 802.1x client version checking for
specified Ethernet ports.
Use the undo dot1x version-check command to disable 802.1x client version
checking for specified Ethernet ports.
By default, 802.1x client version checking is disabled on all Ethernet ports.
In system view, execution of the dot1x version-check command enables the client
version checking function for specified ports if the interface-list argument is specified,
otherwise it enables the function globally. In Ethernet port view, only the current port
can have their client version checking function enabled by executing this command and
the interface-list argument is not needed.
Example
# Configure Ethernet1/0/1 port to check the version of the 802.1x client upon receiving
authentication packets.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface Ethernet1/0/1
[Quidway-Ethernet1/0/1] dot1x version-check
1.1.15 reset dot1x statistics
Syntax
reset dot1x statistics [ interface interface-list ]
View
User view
Parameter
interface-list: Ethernet port list. You can specify multiple Ethernet ports by providing this
argument in the form of interface-list = { interface-name [ to interface- name] & < 1-10 >.
The interface-name argument is the port index of an Ethernet port and can be specified
in this form: interface-name = { interface-type interface-num }, in which, interface-type
specifies the type of a port and interface-num identifies the port number. Note that the
interface name after the keyword to must have an interface-num that is greater than or
equal to that of the interface-name before the to keyword. &<1-10> means that up to 10
port indexes/port index lists can be provided.

Table of Contents

Other manuals for Huawei Quidway S3900 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei Quidway S3900 Series and is the answer not in the manual?

Huawei Quidway S3900 Series Specifications

General IconGeneral
BrandHuawei
ModelQuidway S3900 Series
CategorySwitch
LanguageEnglish

Related product manuals