Command Manual – File System Management
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 File System Management Configuration
Commands
Huawei Technologies Proprietary
1-21
The s3900.bin is stored on unit 2 successfully
The s3900.bin is stored on unit 8 successfully
Do you want to set s3900.bin to be running agent next time to boot[Y/N] y
The s3900.bin is configured successfully
1.3 Configuration Backup and Restore Commands
1.3.1 backup current-configuration to
Syntax
backup { unit unit-id | fabric } current-configuration to dest-addr filename.cfg
View
User view
Parameter
unit-id: Unit ID of a switch.
fabric: Specifies the whole fabric system.
dest-addr: IP address of a TFTP server.
dest-hostname: Host name of a TFTP server.
filename.cfg: Name of the configuration file to which the current configuration will be
backed up, a string of 5 to 56 characters (including the extension .cfg).
Description
Use the backup unit current-configuration to command to back up the current
configuration of a specified switch to a file on a TFTP server.
Use the backup fabric current-configuration to command to back up the current
configurations of all the switches in the fabric to a file on a TFTP server.
Example
# Back up the current configuration of unit 8 to the file aaa.cfg on the TFTP server with
IP address 1.1.1.253.
<Quidway> backup unit 8 current-configuration to 1.1.1.253 aaa.cfg
Backup current configuration to 1.1.1.253. Please wait...
File will be transferred in binary mode.
Copying file to remote tftp server. Please wait...
TFTP: 1958 bytes sent in 0 second(s).
File uploaded successfully.
Unit 8: Backup current configuration finished!
To Next Page
Loading...
Need help?
General