Huawei Quidway S3900 Series Command Manual

Command Manual – Link Aggregation
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 Link Aggregation Configuration
Commands
Huawei Technologies Proprietary
1-6
Description
Use the display lacp system-id command to display the device ID of the local system,
including the system priority and the MAC address.
Related command: link-aggregation.
Example
# Display the device ID of the local system.
<Quidway> display lacp system-id
Actor System ID: 0x8000, 00e0-fc00-0100
Table 1-4 Description on the fields of the display lacp system-id command
Field Description
Actor System ID
Device ID of the local system, including the system
priority and the system MAC address
1.1.5 lacp enable
Syntax
lacp enable
undo lacp enable
View
Ethernet port view
Parameter
None
Description
Use the lacp enable command to enable the LACP protocol.
Use the undo lacp enable command to disable the LACP protocol.
Example
# Enable the LACP protocol on Ethernet1/0/1.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface Ethernet1/0/1
[Quidway-Ethernet1/0/1] lacp enable

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English