Command Manual – Cluster
Quidway S3100 Series Ethernet Switches-Release 1510 Chapter 1 HGMPv2 Configuration Commands
Huawei Technologies Proprietary
1-23
1.3.8 cluster-mac
Syntax
cluster-mac H-H-H
View
Cluster view
Parameter
H-H-H: Multicast MAC address (in hexadecimal), which can be 0180-C200-0000,
0180-C200-000A, and 0180-C200-0020 through 0180-C200-002F.
Description
Use the cluster-mac command to configure a multicast MAC address for cluster
management.
By default, the multicast MAC address is 0180-C200-000A.
Execute this command on management devices only.
Multicast MAC addresses enable the member devices of a cluster to receive multicast
information delivered by the management device, and thus multicast information
sending function is implemented on the management device.
Example
# Configure the multicast MAC address of the management device to be
0180-C200-0028.
<aaa_0.Quidway> system-view
System View: return to User View with Ctrl+Z.
[aaa_0.Quidway] cluster
[aaa_0.Quidway-cluster] cluster-mac 0180-C200-0028
1.3.9 cluster-mac syn-interval
Syntax
cluster-mac syn-interval time-interval
View
Cluster view
Parameter
time-interval: Interval (in minutes) to send multicast packets.
To Next Page
Loading...
Need help?
General