Command Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
Huawei Technologies Proprietary
1-23
Parameter
url-string: URL of the web page used to modify user password on the self-service
server. It is a character string with 1 character to 64 characters. This string cannot
contain a question mark "?". If the actual URL of the self-service server contains any
question mark, you should change it to an elect bar "|".
Description
Use the self-service-url enable command to enable the self-service server location
function
Use the self-service-url disable command to disable the self-service server location
function
Use the undo self-service-url command to restore the default state of this function.
By default, this function is disabled.
Note that:
z This command must be used with the cooperation of a self-service-supported
RADIUS server (such as CAMS). Through self-service, users can manage and
control their accounts or card numbers by themselves. A server installed with the
self-service software is called a self-service server.
z After this command is executed on the switch, users can locate the self-service
server through the following operation: choose [change user password] on the
802.1x client, the client opens the default browser (for example, IE or NetScape)
and locates the specified URL page used to change user password on the
self-service server. Then, the user can change the password.
z A user can choose the [change user password] option on the client only after
passing the authentication. If the user fails the authentication, this option is in
grey and is unavailable.
Note:
Huawei's CAMS Server is a service management system used to manage networks
and secure networks and user information. Cooperating with other network devices
(such as switches) in a network, the CAMS Server accomplishes the AAA
(authentication, authorization and accounting) services and rights management.
Example
# Under the default ISP domain "system", set the URL of the web page used to modi
fy user password on the self-service server to
http://10.153.89.94/selfservice/modPa
sswd1x.jsp|userName.
To Next Page
Loading...
