Command Manual – Auto Detect
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 Auto Detect Configuration Commands
Huawei Technologies Proprietary
1-4
1.1.4 option
Syntax
option [ and | or ]
undo option
View
Detecting group view
Parameter
and: Specifies the detecting result is reachable only when all the IP addresses
contained in the detecting group are reachable.
or: Specifies the detecting result is reachable if one of the IP addresses contained in
the detecting group is reachable.
Description
Use the option command to specify the way to generate detecting results.
Use the undo option command to restore the default way to generate detecting
results.
By default, the and keyword is specified.
When a detecting operation is being carried out, the switch detects each IP address
contained in the detecting group in an ascending order by the list-number values of
the IP addresses.
z If you specify the and keyword, the switch returns unreachable as the detecting
result when the switch fails to ping an IP address contained in the detecting
group and stops detecting.
z If you specify the or keyword, the switch returns reachable as the detecting
result if the switch succeeds in pinging an IP address contained in the detecting
group and stops detecting.
Example
# Specify the or keyword for detecting group 10.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] detect-group 10
[Quidway-detect-group-10] option or
To Next Page
Loading...
