Huawei Quidway S3900 Series - Page 1044

Command Manual – Information Center
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 Information Center Configuration
Commands
Huawei Technologies Proprietary
1-2
Parameter
unit-id: Unit ID.
Description
Use the display info-center command to display the operation status of information
center, the configuration of information channels, the format of time stamp and the
information output in case of fabric.
Related command: info-center enable, info-center loghost, info-center logbuffer,
info-center console channel, info-center monitor channel, info-center trapbuffer,
info-center snmp channel, and info-center timestamp
Example
# Display the operation status of information center, the configuration of information
channels, the format of time stamp of the current system and the information output
status in the IRF system.
<Quidway> display info-center
Information Center:enabled
Log host:
the interface name of the source address : Vlan-interface1
192.168.0.2, channel number : 2, channel name : loghost
language : english, host facility local : 7
Console:
channel number : 0, channel name : console
Monitor:
channel number : 1, channel name : monitor
SNMP Agent:
channel number : 5, channel name : snmpagent
Log buffer:
enabled, max buffer size : 1024, current buffer size : 512
current messages : 512, channel number : 4, channel name : logbuffer
dropped messages : 0, overwrote messages : 586
Trap buffer:
enabled, max buffer size : 1024, current buffer size : 256
current messages : 5, channel number : 3, channel name : trapbuffer
dropped messages : 0, overwrote messages : 0
Information timestamp setting:
log - date, trap - date, debug – boot
IRF SWITCH OF Device--Unit>1: LOG = enable; TRAP = enable; DEBUG = enable