Command Manual – System Maintenance and Debugging
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 3 Device Management Commands
Huawei Technologies Proprietary
3-12
View
User view
Parameter
file-url: Path + name of an host software file in the Flash memory.
device-name: File name, in the form of unit[NO.]>flash: which is used to save the
specified file to the Flash memory of a specified switch.
Description
Use the update fabric command to upgrade the host software of the devices in a
Fabric.
Example
# Use the file named 3900.bin in the Flash memory of Unit2 to upgrade the host
software of the devices in a Fabric.
<Quidway> update fabric unit2>flash:/s3900.bin
This will update the Fabric. Continue? [Y/N] y
The software is verifying ...
The result of verification is :
Unit ID Free space(bytes) Enough Version comparison
1 15281873 Y Y
2 15409873 Y Y
warning: the verification is completed, start the file transmission? [Y/N]
y
The fabric is being updated, 100%
The s3900.bin is stored on unit 1 successfully!
The s3900.bin is stored on unit 2 successfully!
Do you want to set s3900.bin to be running agent next time to boot?[Y/N] y
The s3900.bin is configured successfully!
To Next Page
Loading...
