Huawei Quidway S3900 Series - Page 118

Command Manual - Management VLAN
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 Management VLAN Configuration
Commands
Huawei Technologies Proprietary
1-11
Example
# Display the summary information of the corresponding routes with destination
addresses matched within the natural mask range.
<Quidway> display ip routing-table 169.0.0.0
Destination/Mask Protocol Pre Cost Nexthop Interface
169.0.0.0/16 Static 60 0 2.1.1.1 LoopBack1
For the explanations of the displayed information, see Table 1-4.
# Display the summary information the longest matched routes.
<Quidway> display ip routing-table 169.253.0.0
Destination/Mask Protocol Pre Cost Nexthop Interface
169.0.0.0/8 Static 60 0 2.1.1.1 LoopBack1
# Display the detailed information of the routes with destination addresses matched
within the natural mask range.
<Quidway> display ip routing-table 169.0.0.0 verbose
Routing Tables:
Generate Default: no
+ = Active Route, - = Last Active, # = Both * = Next hop in use
Summary count:2
**Destination: 169.0.0.0 Mask: 255.0.0.0
Protocol: #Static Preference: 60
*NextHop: 2.1.1.1 Interface: 2.1.1.1(LoopBack1)
Vlinkindex: 0
State: <Int ActiveU Static Unicast>
Age: 3:47 Cost: 0/0 Tag: 0
**Destination: 169.0.0.0 Mask: 255.254.0.0
Protocol: #Static Preference: 60
*NextHop: 2.1.1.1 Interface: 2.1.1.1(LoopBack1)
Vlinkindex: 0
State: <Int ActiveU Static Unicast>
Age: 3:47 Cost: 0/0 Tag: 0
# Display the detailed information of the longest matched routes.
<Quidway> display ip routing-table 169.253.0.0 verbose
Routing Tables:
Generate Default: no
+ = Active Route, - = Last Active, # = Both * = Next hop in use
Summary count:1
**Destination: 169.0.0.0 Mask: 255.0.0.0
Protocol: #Static Preference: -60
*NextHop: 2.1.1.1
Vlinkindex: 0