Huawei Quidway S3900 Series Command Manual

Command Manual – Port Security & Port Binding
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 Port Security Commands
Huawei Technologies Proprietary
1-16
 Note:
RADIUS authenticated login using MAC-address (RALM) refers to MAC
address–based RADIUS authentication.
Description
Use the port-security trap command to enable the sending of the specified type(s) of
trap messages.
Use the undo port-security trap command to disable the sending of the specified
type(s) of trap messages.
By default, the system disables the sending of any types of trap messages.
 Note:
This command is designed based on the Device Tracking feature. The Device Tracking
feature enables the switch to send trap messages in case special data packets
(generated by special actions such as illegal intrusion, and abnormal user logon/logoff)
pass through a port for the convenience of network administrator to monitor these
special actions.
When you use the display port-security command to view global information, the
system will display the trap messages enabled.
Related command: display port-security.
Example
# Allow the sending of the intrusion packet discovery trap messages.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] port-security trap intrusion

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English