Huawei Quidway S3900 Series Command Manual

Command Manual – Login
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 Login Commands
Huawei Technologies Proprietary
1-7
View
Any view
Parameter
all: Displays the information about all user interfaces.
Description
Use the display users command to display the information about user interfaces. If
you do not specify the all keyword, only the information about the current user interface
is displayed.
Example
# Display the information about the current user interface.
<Quidway> display users
UI Delay Type Ipaddress Username Userlevel
F 0 AUX 0 00:00:00 3
1 VTY 0 00:06:08 TEL 192.168.0.3
+ : Current operation user.
F : Current operation user work in async mode.F 0 AUX 0 00:00:00
Table 1-2 Descriptions on the fields of the display users command
Field Description
F
The information is about the current user interface, and the
current user interface operates in asynchronous mode.
UI
The numbers in the left sub-column are the absolute user
interface indexes, and those in the right sub-column are the
relative user interface indexes.
Delay The period (in seconds) the user interface idles for.
Type User type
IPaddress The IP address form which the user logs in.
Username The login name of the user that logs into the user interface.
Userlevel
The level of the commands available to the users logging into
the user interface
+ The user interface is in use.

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English