Huawei Quidway S3900 Series - Page 450

Command Manual – Multicast Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 3 Multicast MAC Address Entr
y
Configuration Commands
Huawei Technologies Proprietary
3-3
Parameter
mac-address vlan vlan-id: Multicast MAC address entry in the specified VLAN.
count: Number of MAC entries.
vlan-id: ID of the specific VLAN.
Description
Use the display mac-address multicast static command to display the multicast
MAC address entry/entries manually configured on the switch.
z Executing this command with neither mac-address nor vlan vlan-id will display the
information about all the multicast MAC address entries manually added on the
switch, including the multicast MAC address, VLAN ID, state of the MAC address,
port number and aging time.
z Executing this command with vlan vlan-id but without mac-address will display the
information about all the multicast MAC address entries manually added in the
specified VLAN, including the multicast MAC address, VLAN ID, state of the MAC
address, port number and aging time.
z Executing this command with both mac-address and vlan vlan-id will display the
information about the multicast MAC address entries manually added in the
specified VLAN with the specified multicast MAC address, including the multicast
MAC address, VLAN ID, state of the MAC address, port number and aging time.
z Executing this command with count will display the information about the number
of multicast MAC address entries added on the switch.
Example
# Display all the multicast MAC address entries manually added in VLAN 1.
<Quidway>display mac-address multicast static vlan 1
MAC ADDR VLAN ID STATE PORT INDEX AGING TIME(s)
0100-0001-0001 1 Config static Ethernet1/0/1 N/A
Ethernet1/0/2
Ethernet1/0/3
Ethernet1/0/4
--- 1 static mac address(es) found ---