Command Manual – Multicast Protocol
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 6 PIM Configuration Commands
Huawei Technologies Proprietary
6-21
Static RP functions as the backup of dynamic RP so as to improve the network
robustness. If the RP elected by BSR mechanism is valid, static RP will not work. All
routers in the PIM domain must be configured with this command and be specified with
the same RP address.
The new configuration overwrites the old one if you execute the command for a second
time.
Related command: display pim rp-info.
Example
# Configure 10.110.0.6 as a static RP.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] multicast routing-enable
[Quidway] pim
[Quidway-pim] static-rp 10.110.0.6
To Next Page
Loading...
Need help?
General