Huawei Quidway S3900 Series Command Manual

Command Manual – 802.1x
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 802.1x Configuration Commands
Huawei Technologies Proprietary
1-13
When being executed in system view, these two commands apply to all Ethernet ports
of the switch if you do not provide the interface-list argument. And if you specify the
interface-list argument, these commands apply to the specified Ethernet ports. When
being executed in Ethernet port view, these two commands apply to the current
Ethernet port only. In this case, the interface-list argument is not needed.
Related command: display dot1x.
Example
# Specify to authenticate supplicant systems connected to Ethernet1/0/1 port by port
numbers.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] dot1x port-method portbased interface Ethernet 1/0/1
1.1.9 dot1x quiet-period
Syntax
dot1x quiet-period
undo dot1x quiet-period
View
System view
Parameter
None
Description
Use the dot1x quiet-period command to enable the quiet-period timer.
Use the undo dot1x quiet-period command to disable the quiet-period timer.
When a supplicant system fails to pass the authentication, the authenticator system
(such as a Quidway Ethernet switch) will stay quiet for a period (determined by the
quiet-period timer) before it performs another authentication. During the quiet period,
the authenticator system performs no 802.1x authentication.
By default, the quiet-period timer is disabled.
Related commands: display dot1x, dot1x timer.
Example
# Enable the quiet-period timer.
<Quidway> system-view
System View: return to User View with Ctrl+Z.

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English