Huawei Quidway S3900 Series Command Manual

Command Manual – VLAN
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 VLAN Configuration Commands
Huawei Technologies Proprietary
1-2
View
Any view
Parameter
vlan-id: ID of the specific VLAN interface.
Description
Use the display interface Vlan-interface command to display the information about
the VLAN interface, including:
z Physical state and link state of the VLAN interface
z Format of the sent frames
z MAC address, IP address and subnet mask of the VLAN interface
z Description string and MTU of the VLAN interface
If the vlan-id argument is specified, the information about the specified VLAN interface
is displayed; if the vlan-id argument is not specified, the information about all the
created VLAN interfaces is displayed.
Related command: interface Vlan-interface.
Example
# Display the information about Vlan-interface 2.
<Quidway> display interface Vlan-interface 2
Vlan-interface2 current state : DOWN
Line protocol current state : DOWN
IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is
00e0-fc07-4101
Internet Address is 10.1.1.1/24 Primary
Description : Vlan-interface2 Interface
The Maximum Transmit Unit is 1500
Table 1-1 Description on the fields of the display interface Vlan-interface command
Field Description
Vlan-interface2 current state Current state of the VLAN interface
Line protocol current state Current state of the Line protocol
IP Sending Frames' Format Format of the frames that IP sends
Hardware address
MAC address corresponding to the VLAN
interface
Internet Address
IP address corresponding to the VLAN
interface
Description Description on the VLAN interface

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English