Huawei Quidway S3900 Series Command Manual

New Feature Manual - DHCP
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 DHCP Server Configuration
Commands
Huawei Technologies Proprietary
1-26
pool [ pool-name ]: Specifies a global address pool. The pool-name argument, a string
of 1 to 35 characters, is the name of an address pool. If you do not provide this
argument, this command applies to all global address pools.
interface [ interface-type interface-number ]: Specifies a VLAN interface. If you do not
specify a VLAN interface, this command applies to all VLAN interfaces.
all: Specifies all address pools.
Description
Use the display dhcp server ip-in-use command to display the address binding
information of one IP address, the specified DHCP address pool(s) or all DHCP
address pools.
Related command: reset dhcp server ip-in-use.
Example
# Display the address binding information of all DHCP address pools.
<Quidway> display dhcp server ip-in-use all
Global pool:
IP address Client-identifier/ Lease expiration Type
Hardware address
2.2.2.2 44444-4444-4444 NOT Used Manual
Interface pool:
IP address Client-identifier/ Lease expiration Type
Hardware address
5.5.5.1 0050-ba28-930a Jun 5 2003 10:56: 7 AM Auto:COMMITTED
--- total 2 entry ---
Table 1-3 Description on the fields of the display dhcp server ip-in-use command
Field Description
Global pool
Address binding information of global DHCP
address pools
Interface pool
Address binding information of interface
DHCP address pools
IP address Bound IP address
Client-identifier/Hardware address
User ID or MAC address to which the IP
address is bound
Lease expiration Time when the lease expires

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English