Command Manual – ACL
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 ACL Commands
Huawei Technologies Proprietary
1-5
Example
# Display all time ranges.
<Quidway> display time-range all
Current time is 14:36:36 Apr/2/2003 Thursday
Time-range : hhy ( Inactive )
from 08:30 2/5/2005 to 18:00 2/19/2005
Time-range : hhy1 ( Inactive )
from 08:30 2/5/2003 to 18:00 2/19/2003
Table 1-1 Description on the fields of the display time-range command
Field Description
Current time is 14:36:36
Apr/3/2003 Thursday
System time
Time-range : hhy ( Inactive )
from 08:30 2/5/2005 to 18:00
2-19-2005
Time range hhy. “Inactive” indicates that this time
range is currently in the inactive state (while
“Active” indicates that the time range is in the
active state), and the time range is from 8:30
February 5, 2005 to 18:00 February 19 2005.
# Display the time range named “tm1”.
<Quidway> display time-range tm1
Current time is 14:37:31 Apr/3/2003 Thursday
Time-range : tm1 ( Inactive )
from 08:30 2/5/2005 to 18:00 2/19/2005
Table 1-2 Description of the fields of the display time-range command
Field Description
Current time is 14:36:36
Apr/3/2003 Thursday
The current time of the system.
Time-range : tm1 ( Inactive )
from 08:30 2/5/2005 to 18:00
2/19/2005
Time range tm1. “Inactive” indicates that this
time range is currently in the inactive state (while
“Active” indicates that the time range is in the
active state), and the time range is from 8:30
February 5, 2005 to 18:00 February 19 2005.
To Next Page
Loading...
