Huawei Quidway S3900 Series - Page 730

Command Manual – ACL
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 ACL Commands
Huawei Technologies Proprietary
1-10
Parameter Type Function Description
dscp dscp
Packet
precedence
DSCP priority Value range: 0 to 63
fragment
Fragment
information
Specifies that
the rule is
effective for
non-initial
fragment
packets
-
time-range
time-name
Time range
information
Specifies the
time range in
which the rule
is active
-
 Note:
sour-wildcard/dest-wildcard is the complement of the wildcard mask of the
source/destination subnet mask. For example, you need to input 0.0.255.255 to
specify the subnet mask 255.255.0.0. The arguments can be set as 0 to represent the
host IP address.
To define DSCP priority, you can directly input a value ranging from 0 to 63, or input a
keyword listed in 错误！未找到引用源。.
Table 1-5 Description of DSCP values
Keyword DSCP value in decimal DSCP value in decimal
ef 46 101110
af11 10 001010
af12 12 001100
af13 14 001110
af21 18 010010
af22 20 010100
af23 22 010110
af31 26 011010
af32 28 011100
af33 30 011110