Huawei Quidway S3900 Series Command Manual

Command Manual – VLAN
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 VLAN Configuration Commands
Huawei Technologies Proprietary
1-8
View
System view
Parameter
vlan-id1: ID of the initial VLAN to be created, in the range of 1 to 4,094.
to: Specifies the VLAN range.
vlan-id2: ID of the terminal VLAN to be created, in the range of 1 to 4,094. The
argument is no smaller than the vlan-id1 argument
all: Specifies all VLANs.
Description
Use the vlan to command to create multiple VLANs once.
Use the undo vlan to command to remove multiple VLANs once.
Caution:
The undo vlan to command or the undo vlan all command cannot be used to remove
the VLANs kept by the protocol, the Voice VLANs, the default VLANs (VLAN 1), the
management VLANs and the probe VLANs for remote mirroring.
Example
# Create VLAN 4 through VLAN 100.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] vlan 4 to 100
Note:The VLAN kept by protocol, the voice VLAN, the default VLAN, the manageme
nt VLAN and the remote probe VLAN will not be deleted!
Please wait............. Done.
# Remove VLAN 2 through VLAN 9 once, in which VLAN 5 is a Voice VLAN.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] undo vlan 2 to 9
Note:The VLAN kept by protocol, the voice VLAN, the default VLAN, the manageme
nt VLAN and the remote probe VLAN will not be deleted!
Please wait... Done.
[Quidway] display vlan
The following VLANs exist:

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English