Huawei Quidway S3900 Series Command Manual

Command Manual – IRF Fabric
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 IRF Fabric Commands
Huawei Technologies Proprietary
1-7
Total number of units in fabric : 8, My Unit ID : 1
UID CPU-Mac Priority Stack-Port Board-ID A/M
*1 00e0-fc00-5002 10 /Right 1 A
2 00e0-fc03-5132 10 Left/ 1 A
3 00e0-fc04-5252 10 /Right 1 A
4 00e0-fc05-8922 10 Left/ 1 A
5 000f-cbb7-2142 10 /Right 1 A
6 000f-cbb7-3264 10 Left/ 1 A
7 000f-cbb7-2260 10 /Right 1 A
8 000f-cbb7-2734 10 Left/ 1 A
<Quidway> fabric save-unit-id
The unit ID will be saved to the device.
Are you sure? [Y/N] y
%Apr 2 02:13:44:413 2000 3900 FTM/3/DDPFLA:- 4 -Save self unitid, unit 4 sav
ed UnitID(4) in flash!
Unit 1 saved unit ID successfully.
Unit 2 saved unit ID successfully.
Unit 3 saved unit ID successfully.
Unit 4 saved unit ID successfully.
Unit 5 saved unit ID successfully.
Unit 6 saved unit ID successfully.
Unit 7 saved unit ID successfully.
Unit 8 saved unit ID successfully.
<Quidway>display ftm topology-database
Total number of units in fabric : 8, My Unit ID : 4
UID CPU-Mac Priority Stack-Port Board-ID A/M
*1 00e0-fc00-5002 5 /Right 1 M
2 00e0-fc03-5132 5 Left/ 1 M
3 00e0-fc04-5252 5 /Right 1 M
4 00e0-fc05-8922 5 Left/ 1 M
5 000f-cbb7-2142 5 /Right 1 M
6 000f-cbb7-3264 5 Left/ 1 M
7 000f-cbb7-2260 5 /Right 1 M
8 000f-cbb7-2734 5 Left/ 1 M
From the above example, you can see the priority of each unit change from 10 to 5, and
the numbering mode change from A (automatic numbering) to M (manual numbering).
# Remove the saved unit ID of each unit.
<Quidway> undo fabric save-unit-id
The saved unit ID will be erased.
Are you sure? [Y/N] y
Unit 1 removed unit ID successfully.

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English